STRENGTH, PHYSICAL AND CHEMICAL PROPERTY TESTS OF CEMENT

Cement is a binding substance that is formed by firing clay and lime and has a very important place in building materials. The areas where cement is used frequently are in the production of concrete and mortar, which is a strong building material that is generally resistant to normal environmental effects. This section includes the devices and equipment for strength tests, physical and chemical property tests, building lime, grout and mud tests of cements.

Automatic Cement Compression and Flexure Testing Machines

Automatic Cement Compression and Flexure Testing Machines

The Double testing chamber automatic cement compression and flexure testing machines have been designed for reliable and consistent compression and flexural tests of mortar samples.

P.Code: M2550

ORIGIN: TÜRKİYE

Automatic Cement Compression Testing Machines

Automatic Cement Compression Testing Machines

The Single chamber automatic cement compression testing machines have been designed for reliable and consistent compression tests of mortar samples.

P.Code: M2560

ORIGIN: TÜRKİYE

Automatic Blaine Test Device

Automatic Blaine Test Device

The Automatic blaine test device is microprocessor-controlled analyzer for measurement of the specific surface (Blaine value) of powders.

P.Code: M2460

ORIGIN: TÜRKİYE

Blaine Air Permeability Apparatus

Blaine Air Permeability Apparatus

The Manual model Blaine air permeability device is used to determine the fineness of portland cement, limes and similar powders expressed in terms of their specific surface.

P.Code: M2470

ORIGIN: TÜRKİYE

Automatic Vicat Test Device

Automatic Vicat Test Device

The Automatic Vicat Test Device is used for the determination of the setting time and consistency of cement by Vicat method.

P.Code: M2440

ORIGIN: TÜRKİYE

Vicat Test Apparatus

Vicat Test Apparatus

The Manual model Vicat Test Apparatus is used to determine the amount of water required to produce a cement paste of standard consistency and the setting time.

P.Code: M2450

ORIGIN: TÜRKİYE

Automatic Mortar Mixer

Automatic Mortar Mixer

The Automatic mortar mixer is designed to mix mortars and cement pastes to the requirements of EN 196-1 and EN 196-3.

P.Code: M2420

ORIGIN: TÜRKİYE

Manual Mortar Mixer

Manual Mortar Mixer

The Manual mortar mixer has been designed to mix mortars and cement pastes primarily to the international of standards.

P.Code: M2430

ORIGIN: TÜRKİYE

Cement Flow Table

Cement Flow Table

The Cement Flow Tables are used for determining the consistency of mortar, lime and cement specimens. Cement Flow Tables are produced in two models as manual and motorized.

P.Code: M2520

ORIGIN: TÜRKİYE

Automatic Jolting Table

Automatic Jolting Table

The Automatic jolting table is used to compact cement mortar prisms 40x40x160 mm in the three gang mould, as requested by the above specifications.

P.Code: M2400

ORIGIN: TÜRKİYE

Vibrating Machine

Vibrating Machine

The M2680 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens.

P.Code: M2680

ORIGIN: TÜRKİYE

Le Chatelier Water Bath

Le Chatelier Water Bath

The Le Chatelier water bath is used with Le Chatelier moulds for the determination of the soundness of cement paste fly ash for concrete and lime.

P.Code: M2600

ORIGIN: TÜRKİYE

Le Chatelier Mould

Le Chatelier Mould

The Le Chatelier mould is used to determine the volume stability of cement.

P.Code: M2610

ORIGIN: TÜRKİYE

Le Chatelier Flask

Le Chatelier Flask

The Le Chatelier flask is used to determine the density of hydraulic cement, ground granulated blast-furnace slag and fly ash for concrete, filler aggregates and lime.

P.Code: M2605

ORIGIN: TÜRKİYE

Mud Balance

Mud Balance

The Mud Balance is provides an accurate and easy method for determining the mud density.

P.Code: M2510

ORIGIN: TÜRKİYE

Marsh Funnel Viscosity Set

Marsh Funnel Viscosity Set

The Marsh Funnel Viscosity Set is used for the determination of flow time by the use of flow cups of fluid materials such as paint, varnish.

P.Code: M2640

ORIGIN: TÜRKİYE

Flow Cone Apparatus

Flow Cone Apparatus

Product code M2580 Flow cone apparatus cement, mud, mortar and viscosity Determination of viscosity of liquids, such as materials suitable for. Capacity: 2000 cc.

P.Code: M2580

ORIGIN: TÜRKİYE

Digital Length Comparator

Digital Length Comparator

The Digital Length Comparator is used to determine the length changes on different type of cement prisms.

P.Code: M2590

ORIGIN: TÜRKİYE

Shrinkage Mould

Shrinkage Mould

The Two gang shrinkage mould is have been manufactured from steel and all internal surfaces are machined.

P.Code: M2650

ORIGIN: TÜRKİYE

Three Gang Mortar Prism Moulds

Three Gang Mortar Prism Moulds

Three Gang Mortar Prism Moulds are have been manufactured from steel and all internal surfaces are machined.

P.Code: M2490

ORIGIN: TÜRKİYE

Plunger Penetrometer

Plunger Penetrometer

The Plunger Penetrometer is used to determine the consistency of fresh mortar, lime and masonry cement.

P.Code: M2530

ORIGIN: TÜRKİYE

Mortar Air Entrainment Meter

Mortar Air Entrainment Meter

The Mortar Air Entrainment Meter is used for determining the air content of cement paste, cement mortar and lime mortar.

P.Code: M2410

ORIGIN: TÜRKİYE

Accessories For Cement Compression And Flexure Testing Machine

Accessories For Cement Compression And Flexure Testing Machine

The Accessories are used with automatic cement compression and flexure testing machines.

P.Code: M2555

ORIGIN: TÜRKİYE