Single Column Universal Test Machine

Single Column Universal Test Machine Single Column Universal Test Machine Single Column Universal Test Machine

Single Column Universal Test Machine

U6000/05 Single Column Electromechanical Universal Test Machine 5 kN Capacity, 220-240 V 50 /60 Hz
U6000/10 Single Column Electromechanical Universal Test Machine 10 kN Capacity
U6000/20 Single Column Electromechanical Universal Test Machine 20 kN Capacity
U6000/50 Single Column Electromechanical Universal Test Machine 50 kN Capacity
Standards: EN 10002-1, EN1002-5 | ASTM A370, ASTM D412, ASTM D695, ASTM E23, ASTM E290, ASTM E 139, ASTM E190, ASTM E 1012 | ISO 6892, ISO 1608, BS EN ISO 7270 | NADCAP GE- S400 , CREEP, NFA 03403
U6000/05 Single Column Electromechanical Universal Test Machine 5 kN Capacity, 220-240 V 50 /60 Hz
U6000/10 Single Column Electromechanical Universal Test Machine 10 kN Capacity
U6000/20 Single Column Electromechanical Universal Test Machine 20 kN Capacity
U6000/50 Single Column Electromechanical Universal Test Machine 50 kN Capacity
Standards: EN 10002-1, EN1002-5 | ASTM A370, ASTM D412, ASTM D695, ASTM E23, ASTM E290, ASTM E 139, ASTM E190, ASTM E 1012 | ISO 6892, ISO 1608, BS EN ISO 7270 | NADCAP GE- S400 , CREEP, NFA 03403

Single Column Universal Test Machine

The single column universal test machines are produced for testing plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, wire, cable, steel etc materials.
The electromechanical universal test machines are desktop solution for low load material testing present the state of the art testing specifications combined with a modern look and ergonomic design. Electrical servomotor driven, maintence-free, for precise, quiet and smooth work.
The machines are produce a single-column and single-screw test system with capacities ranging from 0.5 kN to 50 kN.
The Single column universal test machines is formed from mobile crosshead, powered by one prestressed ballscrew, guided by one chromed steel column. There are ability to equip it with several load cells to improve accuracy of measurement and control at very low loads. The machine is automatic recognize of cells and extansometer.
Optimized test space to perform any materials testing with using the right accessories. Devices are automatic operation, servocontroled in force, displacement and strain.
Single column universal test machines of can perform many tests:
Tensile test according to ISO 6892 , EN 10002 – 1 and ASTM E23, ASTM E290 bending test , tests according to NADCAP GE- S400 , CREEP ASTM E 139 , ASTM E190 test on welds , testing shear , material testing at high temperature EN1002 -5 compression test ASTM D695 , ASTM E 1012 , ISO 1608 , fatigue tests with constant amplitude BS EN ISO 7270, fatigue tests at low frequency NFA 03403 , ASTM D412 .
Test can be performed on specimens of different sizes and shapes of preparation: standardized specimens with threaded head or machined flat, welded metal joints mechanical, adhesive bonding, etc. .
All materials for their test specimen dimensions fit in the maximum capacity of the machine, can be tested in the testing machine steel, elastomers, wood, rubber, aluminum, composites, titanium, plastics, biomaterials , cement , equipment medical prosthetic tooth.
The single column universal test machines can do tensile, peel, tear, heat seal, adhesive, compression, bend and open force test with suitable grip and accessories.
For low force applications, the single column universal test machines provides 0.5kN to 50 kN capacity available in standard and extra height options.
The Single column universal test machines are equipped with a single column different vertical test space ,the test space is tested at 0.001 mm/min~2540 mm/min (adjustable) test speed to reduce test time for the test materials which the test standard requested.

Application Test
1. Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, wire, cable, steel etc.
2. Different Test with Different Grips: tensile, peel, tear, heat seal, adhesive, compression, bend and open force etc.
3. Deformation Under Defined Load: Test deformation under defined load of tested sample.
4. Load Under Defined Deformation: Test load under defined deformation of tested sample.
5. Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.

TMC304 Software
The TCM304 software is designed purposely for computer controlled electronic universal testing machine, used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this universal test equipment system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.

Technical Specifications for Single Column Universal Test Machine

P.Code

U6000/05

U6000/10

U6000/20

U6000/50

Force Capacity 5 kN (1120 lbf) 10 kN (2250 lbf) 20 kN (4500 lbf) 50 kN (11250 lbf)

Crosshead Travel

510 mm (20.07 in) 870 mm (34.25 in) 870 mm (34.25 in) 870 mm (34.25 in)
Vertical Test Space 740 mm (29.13 in) 1120 mm (44.09 in) 1120 mm (44.09 in) 1120 mm (44.09 in)
Horizontal Test Space 100 mm (3.9 in) 100 mm (3.9 in) 100 mm (3.9 in) 100 mm (3.9 in)
Maximum Speed 2540 mm/min (100 in/min) 2540 mm/min (100 in/min) 2540 mm/min (100 in/min) 2540 mm/min (100 in/min)
Minumum Speed 0.001 mm/min (0.00004 in/min) 0.001 mm/min (0.00004 in/min) 0.001 mm/min (0.00004 in/min) 0.001 mm/min (0.00004 in/min)
Position Control Resolution 9.5 nm (0.38 μin) 9.5 nm (0.38 μin) 9.5 nm (0.38 μin) 9.5 nm (0.38 μin)
Frame Axial Stiffness 8.5 kN/mm (48500 lb/in) 8.5 kN/mm (48500 lb/in) 8.5 kN/mm (48500 lb/in) 8.5 kN/mm (48500 lb/in)
Encoder Accuracy

0.01 mm

0.01 mm

0.01 mm

0.01 mm

Electrical Requirement 220-240V, 50-60Hz,1 phase 220-240V, 50-60Hz,1 phase 220-240V, 50-60Hz,1 phase 220-240V, 50-60Hz,1 phase
Dimensions (wxlxh) 470×620x1025 mm (18×24x40 in) 470×620x1420 mm (18×24x56 in) 470×620x1420 mm (18×24x56 in) 470×620x1420 mm (18×24x56 in)
Weight 60 kg (132 lb) 65 kg (143 lb) 65 kg (143 lb) 65 kg (143 lb)

Documents and Video for Single Column Universal Test Machine

Single Column Universal Test Machine - Universal Test Systems - Testmak Material Testing Equipment Single Column Universal Test Machine - Universal Test Systems  - Testmak Material Testing Equipment The single column universal test machines can do tensile, peel, tear, heat seal, adhesive, compression, bend and open force test with suitable grip and accessories. - Testmak Material Testing Equipment U6000
Rated 5/5 based on 36 customer reviews
$5,000.00 In stock
$5,000.00 to $5,000.00 from 1 Testmak
The single column universal test machines can do tensile, peel, tear, heat seal, adhesive, compression, bend and open force test with suitable grip and accessories. - Testmak Material Testing Equipment
Quality Equipment - by , January 8, 2023
5/ 5stars
Thank you for your technical support.
Delivery Time - by , April 25, 2020
5/ 5stars
Thanks for the on time delivery.