Automatic Marshall Impact Compactor (EN)
Product Code
B1540/E | Automatic Marshall Impact Compactor EN Std for 4" dia. specimens, 220-240 V 50/60 Hz |
B1540SC | Soundproof Safety Cabinet for Marshall Compactors |
B1548 | Marshall Compaction Mould, 4 Inches |
B1549 | Marshall Compaction Mould, 6 Inches |
B1547 | Marshall Storage Plate for 6 pcs. for 4 Inches (101.6mm) specimens |
Standards
EN 12697-10 | EN 12697-30
General Description
The EN Standard Automatic Marshall Compactor is automatically compacts the sample and stops after the preset number of blows. The mould is held in position by a quick and practical clamping device. The 4535 g ± 15 g sliding hammer falls at the 457 ± 5 mm distance for every blow. Automatic control Complete protection for operator safety to CE prescriptions.
Digital console incorporating the emergency stop button to CE prescriptions. The unit incorporates a compaction pedestal, comprising a laminate hardwood block secured to by a 300 mm square x 25 mm thick steel plate. System stops automatically for safety when opened compactor cover.
The compactor can be factory installed inside the soundproof and CE security cabinet.
Specifications
Hammer Weight |
4535 ± 15 g |
---|---|
Free Fall Height |
457 ± 5 mm |
Tamping Face Diameter |
98,5 mm |
Concrete Base |
450x450x200 mm |
Laminated Block Dimensions |
200x200x450 mm |
Blows Frequency |
50 blows in 55/60 s |
Dimensions |
540x500x2000 mm |
Weight (approx) |
260 kg |
Power |
370 W |
-
ASPHALT
- Asphalt Content Furnace
- Asphalt Mixer
- Asphalt Penetrometer
- Benkelman Beam Test Set
- Binder Recovery Apparatus
- Centrifuge Extractor
- Cleveland Flash Point Tester
- Ductility Test Machine
- Emulsion Distillation Unit
- Kinematic Viscometer
- Marshall Compactor
- Marshall Stability Test Machines
- Marshall Water Baths
- Pavement Core Drill Machine
- Reflux Extractor
- Ring and Ball Test Device
- Rolling Thin Film Oven
- Sample Extruder for Asphalt
- Saybolt Viscometer
- Solvent Recovery Distiller
- Travelling Beam Device
- Vacuum Pycnometer