Bain d eau pour les specimens Marshall ›

Bain d'eau pour les spécimens Marshall

Code Produit

TMB-1640	Marshall Water Bath, 15 L, 220-240V 50/60 Hz
TMB-1642	Marshall Water Bath, 30 L, 220-240V 50/60 Hz
TMB-1644	Marshall Water Bath, 48 L, 220-240V 50/60 Hz
TMB-1640CS	Marshall Water Bath with Cooler Unit, 15 L, 220-240V 50/60 Hz
TMB-1642CS	Marshall Water Bath with Cooler Unit, 30 L, 220-240V 50/60 Hz
TMB-1644CS	Marshall Water Bath with Cooler Unit, 48 L, 220-240V 50/60 Hz

Normes

ASTM D1559 | EN 12697-34 | EN 13108th | D5581 | AASHTO T245

Descripción

The Testmak Series Marshall Water Baths are used in various material testing analyses. 15, 30 and 48 lt. tank capacity models are available and can be ordered with or without cooler units. Temperature is from ambient to 95°C. Internal surfaces are polished stainless steel with a sheet steel insulated outercase.
The EN 12697-23 covering the determination of the strength of bituminous mixtures, prescribe a water conditioning temperature of 5°C or from 5 to 25°C which are obtainable with a cooling system. Water bath are used for asphalt (marshall, bitumen testing), cement (curing on conditioning) applications.The cooler unit is located under the water bath. Complete with re-circulating unit for temperature uniformity.

Caractéristiques

P.Code	Capacity	Int. Dimensions	Ext. Dimensions	Temperature Range	Weight (approx.)
TMB-1640	15 Liters	160x330x300 mm	300x500x360 mm	for ambient to +90°C ± 1°C	15 kg
TMB-1642	30 Liters	160x520x250 mm	300x700x380 mm	for ambient to +90°C ± 1°C	18 kg
TMB-1644	48 Liters	160x620x500 mm	300x820x600 mm	for ambient to +90°C ± 1°C	25 kg
TMB-1640CS	15 Liters	160x330x300 mm	625x400x600 mm	+5°C to +70°C± 0,5°C	26 kg
TMB-1642CS	30 Liters	160x510x300 mm	625x400x760 mm	+5°C to +70°C± 0,5°C	36 kg
TMB-1644CS	48 Liters	160x620x510 mm	650x620x900 mm	+5°C to +70°C± 0,5°C	48 kg

ASPHALTE - BITUME