Accessoires pour Presse ciment
Code Produit
TMM-2555A strong> p> |
Compression Jig Assembly to test 50 mm (2”) mortar cubes, ASTM p> |
TMM-2555E strong> p> |
Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN p> |
TMM-2558 strong> p> |
Compression Jig Assembly BS, to test 70,7 mm mortar cubes p> |
TMM-2560A strong> p> |
Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM p> |
TMM-2560E strong> p> |
Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN p> |
TMM-2561 strong> p> |
Tensile Adhesion Strength Test Apparatus, 5 kN, EN 1348 p> |
TMM-2562 strong> p> |
Pull Headed Plate Set, EN 1348 p> |
TMM-2563 strong> p> |
Pull Headed Plate Set, EN 1015-12 p> |
TMM-2564 strong> p> |
Frusto-Conical Shaped Ring, EN 1015-12 p> |
Normes
EN 196-1 | BS 3892 | ASTM C109 | NFP18-411 | DIN 1164 | UNE 80101 | EN ISO 679
Descripción
The Accessories are used with automatic cement compression and flexure testing machines.
Compression Devices
Compression Devices are used with cement compression machine for 50 mm (2”) cube moulds. Robust frame fitted with an upper bearer that moves vertically supported by springs. One of the two lower bearer can tilt horizontally and the distance between the two bearers is 100 mm for the EN model and 119 mm for the ASTM model. Total height is 188 mm,Weight approx.: 8 kg
Flexural Devices
Flexural Devices are used with cement flexural machine for 40*40*160 mm prism moulds. Robust frame fitted with an upper bearer that moves vertically supported by springs. One of the two lower bearer can tilt horizontally and the distance between the two bearers is 100 mm for the EN model and 119 mm for the ASTM model. Total height is 188 mm,Weight approx.: 8 kg
Tensile Adhesion Strength Test
TMM-2561 Tensile Adhesion Strength Test can be fitted to the TESTMAK Cement Compression or Compression / Tension testing machines. This apparatus is supplied complete with 5 kN load cell and should be installed at our factory.
TMM-2562 Pull-Headed Plate Set consists of 6 pcs. metal plates with a fitting for connection to the test machine. The plates are 50x50 mm edged and 10 mm thickness.
TMM-2563 Pull Headed Plate Set consists of 6 pcs. stainless steel plates with a fitting for connection to the test machine. The plates 50 mm dia. and 20 mm thickness.
TMM-2564 Frusto-Conical Shaped Ring is 50mm dia. and stainless steel.
Caractéristiques
-
CIMENT
- Aerometre à Mortier
- Appareil de cône d'écoulement
- Appareil de Vicat
- Appareil Vicat Automatique
- Bain pour Le Chatelier
- Boule équilibre pour mud
- Deformomètre a digital
- Densimetre pour Le Chatelier
- Malaxeur à Mortier
- Marais entonnoir viscosimètre
- Moule pour Deformomètre
- Moule pour Le Chatelier
- Moules à Mortier
- Perméabilimètre de Blaine
- Plongeur pénétromètre pour essai de consistance
- Presse ciment à automatique pour essais compression et flexion
- Table à Chocs
- Table à vibrant pour moule de mortier de cube
- Tables à secousses pour des mortier