Martillo para Pruebas En Concreto Tipo N

Martillo para Pruebas En Concreto Tipo N Martillo para Pruebas En Concreto Tipo N Martillo para Pruebas En Concreto Tipo N

Martillo para Pruebas En Concreto Tipo N

TMC-3290

Concrete Rebound Hammer (N Type)

Standards: EN 12504 - 2 | ASTM C805 | DIN 1048 | BS 1881:202

TMC-3290

Concrete Rebound Hammer (N Type)

Standards: EN 12504 - 2 | ASTM C805 | DIN 1048 | BS 1881:202

Martillo para Pruebas En Concreto Tipo N

The Concrete Rebound Hammer (Schmidt Hammer) is designed to determine the strength of concrete in finished structures by the method of elastic rebound, the indications are determined with the help of nondestructive testing method. The device is made of aluminum, characterized by simple construction, easy use and maintenance. The advantage is the high accuracy of the test results and the control of the production process at all stages.
Principle of operation: the kick strikes against a hard surface, after which it bounces to a certain height (H) in conventional units of the scale of the device, which is an indirect characteristic of the strength of concrete for compression.
The delivery set includes a calibration table in N / mm² (MPa), an abrasive, a carrying case.

Especificaciones Técnicas de Martillo para Pruebas En Concreto Tipo N

Impact Energy

2.207J (0.735Nm)

Measured Strength Range

10-70 MPa

Dimensions

Ø85х330 mm

Weight

1.4 kg

Video y ficha técnica de Martillo para Pruebas En Concreto Tipo N

Martillo para Pruebas En Concreto Tipo N C3290
Martillo para Pruebas En Concreto Tipo N