GRANULATS
PROPRIÉTÉS GÉNÉRALES ET GÉOMÉTRIQUES DES GRANULATS
CATÉGORIE DE PRODUIT
MACHINE POUR LES ESSAIS STATIQUES DE TRAVERSES EN BÉTON
MACHINE POUR LES ESSAIS STATIQUES DE TRAVERSES EN BÉTON
| C5600 | Concrete Railway Sleepers and Bearers Static Testing Machine, 220-240 V 50-60 Hz |
| C5600/110 | Concrete Railway Sleepers and Bearers Static Testing Machine, 110 V 60 Hz |
Normes: EN 13230-2, EN 13230-3 and EN 13230-4
| C5600 | Concrete Railway Sleepers and Bearers Static Testing Machine, 220-240 V 50-60 Hz |
| C5600/110 | Concrete Railway Sleepers and Bearers Static Testing Machine, 110 V 60 Hz |
Normes: EN 13230-2, EN 13230-3 and EN 13230-4
MACHINE POUR LES ESSAIS STATIQUES DE TRAVERSES EN BÉTON
The C5600 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four column design carrying the ram fitted to the upper crosshead. The frames has a double acting stroking ram with over travel switch protection to shut the machine down when maximum ram travel is reached. A load cell is used for load measurements on the frame.
The TMC-5600 600 kN capacity Flexural Frame is designed to accept all accessories required for flexural, transverse or compression tests.
The load frame provides the stability needed for accurate and repeatable test results over the years of operation.
TESTMAK 600 kN capacity Flexural Frame can be connected to any TESTMAK compression machine as a second frame or can be used with any TESTMAK power pack as an independent Flexural Machine.
Flextural test assemblies should be ordered seperately.
Characteristics:
• High stability four column design
• 350 mm piston stroke with safety limit switch
• High accuracy load measurement with strain gauge load cells
• Can accept wide range of accessories for mentioned standards
• The distance between lower rollers can be set up to 1400 mm
• Can be connected to any TESTMAK compression machine or TESTMAK power pack
The TMC-5600 600 kN capacity Flexural Frame is designed to accept all accessories required for flexural, transverse or compression tests.
The load frame provides the stability needed for accurate and repeatable test results over the years of operation.
TESTMAK 600 kN capacity Flexural Frame can be connected to any TESTMAK compression machine as a second frame or can be used with any TESTMAK power pack as an independent Flexural Machine.
Flextural test assemblies should be ordered seperately.
Characteristics:
• High stability four column design
• 350 mm piston stroke with safety limit switch
• High accuracy load measurement with strain gauge load cells
• Can accept wide range of accessories for mentioned standards
• The distance between lower rollers can be set up to 1400 mm
• Can be connected to any TESTMAK compression machine or TESTMAK power pack
Spécifications Techniques des MACHINE POUR LES ESSAIS STATIQUES DE TRAVERSES EN BÉTON
Capacity |
600 kN |
|---|---|
Vertical Clearance |
930 mm ( Without accessories) |
Horizontal Clearance |
640 mm |
Max. Clerance Between Lower Rollers |
2000 mm |
Piston Diameter |
200 mm |
Max. Piston Movement |
350 mm |
Max. Working Pressure |
410 Bar |
Oil Capacity |
18 L |
Power |
1100 W |
Dimensions (wxlxh) |
1100x2000x2700 mm |
Weight |
2600 kg |
Vidéo et Fiche Technique des MACHINE POUR LES ESSAIS STATIQUES DE TRAVERSES EN BÉTON
