GRANULATS
PROPRIÉTÉS GÉNÉRALES ET GÉOMÉTRIQUES DES GRANULATS
CATÉGORIE DE PRODUIT
Consolidation (œdomètre à chargement frontal)
|
TMS-4110 |
Front Loading Oedometer (Consolidation) Set |
|
TMS-4111 |
Oedometer |
|
TMS-4112 |
Bench for Consolidation, 3 Oedometer Capacity |
|
TMS-4113 |
Consolidation Cell for High Pressure, Ø 50 mm |
|
TMS-4114 |
Consolidation Cell for High Pressure, ASTM Ø 63.5 mm (2.5”) |
|
TMS-4115 |
Consolidation Cell for High Pressure, BS/EN, Ø 75 mm |
|
TMS-4116 |
Calibration Disc for Ø 50 mm Consolidation Cell |
|
TMS-4117 |
Calibration Disc for Ø 63,5 mm Consolidation Cell |
|
TMS-4118 |
Calibration disc for Ø 75 mm Consolidation Cell |
|
TMS-4124 |
Set of Weight for Consolidation - 80 kg (6x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g) |
|
TMG-0936 |
Analog Dial Gauge, 30x0.01 mm |
|
TMG-0938 |
Digital Dial Gauge 25 x 0.01 mm - LCD Display - Data Output |
MORE
Consolidation (œdomètre à chargement frontal)
The Consolidation test is used to determine the consolidation characteristics of soils of low permeability. The TMS-4110 Front Loading Oedometer is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a lever arm assembly and one of three alternative beam ratios as 9:1, 10:1 and 11:1. The beam is fitted with a counter balance weight and beam support jack. The cell platform will accept the complete range consolidation cells and is fitted with a central spigot to ensure accurate centering of the cell under the loading.
The TESTMAK fixed ring consolidation cells are manufactured from corrosion-resistant materials and conform to the requirements of the relevant standards. An integral water reservoir is incorporated in the cell which allows the specimen to be inundated when required. All cells are supplied complete with upper and lower porous disc, pressure pad and cutting (specimen) ring.
Consolidation cell, dial gauge or displacement transducer and data logger, bench, weights, apparatuses for prepare Consolidation samples and calibration disc should be ordered separately.
TMS-4110 Front Loading Oedometer (Consolidation) Set is supplied complete with;
• TMS-4111 | Oedometer - 3 pcs
• TMS-4112 | Bench for Consolidation, 3 Oedometer Capacity - 1 pcs
• TMS-4114 | Consolidation Cell for High Pressure, ASTM Ø 63.5 mm (2.5”) - 3 pcs
• TMS-4117 | Calibration Disc for Ø 63,5 mm Consolidation Cell - 3 pcs
• TMS-4124 | Set of Weight for Consolidation - 80 kg (6x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g)
• TMG-0936 | Analog Dial Gauge, 30x0.01 mm - 3 pcs
Spécifications Techniques des Consolidation (œdomètre à chargement frontal)
Cell P.Code |
TMS-4113 |
TMS-4114 |
TMS-4115 |
|---|---|---|---|
Aplication |
High Pressure |
ASTM |
BS/EN |
Specimen Diameter |
50 mm |
63.5 mm |
75 mm |
Specimen Area |
1963 mm |
4.906 inch |
4416 mm |
Beam Ratio |
10:1 |
11:1 |
9:1 |
Total Load |
64 kg |
64 kg |
80 kg |
Stress |
32 kg/cm` |
20 t/ft` |
16.3 kg/cm` |
Stress for 1 kg |
0.5 kg/cm` |
0.3125 ton/ft` |
0.2/cm` |
Dimensions (wxlxh) |
750x850x1400 mm (3 pcs TMS-4111 +TMS-4112 + Accessories) |
||
Weight |
180 kg (3 pcs TMS-4111 +TMS-4112 + Accessories) |
||
|
P. Code |
Sets of Weight for Consolidation |
||
|
TMS-4120 |
16 kgf Set |
(2) 5 kg, (1) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg |
|
|
TMS-4121 |
32 kgf Set |
(1) 10 kg, (3) 5 kg, (2) 2 kg, (1) 1 kg, (3) 0,5 kg, (2) 0,25 kg |
|
|
TMS-4122 |
50 kgf Set |
(3) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg |
|
|
TMS-4123 |
64 kgf Set |
(4) 10 kg, (3) 5 kg, (2) 2 kg, (3) 1 kg, (3) 0,5 kg, (2) 0,25 kg |
|
|
TMS-4124 |
80 kgf Set |
(6) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg |
|
Vidéo et Fiche Technique des Consolidation (œdomètre à chargement frontal)
