GRANULATS
PROPRIÉTÉS GÉNÉRALES ET GÉOMÉTRIQUES DES GRANULATS
CATÉGORIE DE PRODUIT
TABLES À SECOUSSES POUR DES MORTIER
|
TMM-2520A |
Manual Cement Flow Table ASTM Standards |
|
TMM-2525A |
Motorized Cement Flow Table ASTM Standards, 220-240 V 50 Hz |
|
TMM-2525A/110 |
Motorized Cement Flow Table ASTM Standards, 110 V 60 Hz |
|
TMM-2520E |
Manual Cement Flow Table EN Standards |
|
TMM-2525E |
Motorized Cement Flow Table EN Standards, 220-240 V 50 Hz |
|
TMM-2525E/110 |
Motorized Cement Flow Table EN Standards, 110 V 60 Hz |
|
TMM-2521 |
Tamper EN Ø 40x200 mm 250 gr |
|
TMM-2522 |
Brass Mould EN - 100 mm base dia. x 70 mm top dia. x 60 mm height. |
|
TMM-2523 |
Tamper ASTM Hardwood 13x25x150 mm |
|
TMM-2524 |
Brass Mould ASTM - 100 mm base dia. x 70 mm top dia. x 50 mm height. |
Normes: ASTM C230 | EN 459-2, 1015-3
|
TMM-2520A |
Manual Cement Flow Table ASTM Standards |
|
TMM-2525A |
Motorized Cement Flow Table ASTM Standards, 220-240 V 50 Hz |
|
TMM-2525A/110 |
Motorized Cement Flow Table ASTM Standards, 110 V 60 Hz |
|
TMM-2520E |
Manual Cement Flow Table EN Standards |
|
TMM-2525E |
Motorized Cement Flow Table EN Standards, 220-240 V 50 Hz |
|
TMM-2525E/110 |
Motorized Cement Flow Table EN Standards, 110 V 60 Hz |
|
TMM-2521 |
Tamper EN Ø 40x200 mm 250 gr |
|
TMM-2522 |
Brass Mould EN - 100 mm base dia. x 70 mm top dia. x 60 mm height. |
|
TMM-2523 |
Tamper ASTM Hardwood 13x25x150 mm |
|
TMM-2524 |
Brass Mould ASTM - 100 mm base dia. x 70 mm top dia. x 50 mm height. |
Normes: ASTM C230 | EN 459-2, 1015-3
TABLES À SECOUSSES POUR DES MORTIER
The Cement Flow Tables are used for determining the consistency of mortar, lime and cement specimens. Cement Flow Table are produced in two models as manual and motorized.
The M2520A and M2520E manual models cement flow tables are included with a hand wheel. The M2525A and M2525E motor operated models cement flow tables are driven by a motor speed reducer coupling at the rate of one rev per second. The number of drops can preset on a counter and the machine stops automatically at the end of the cycle.
Cement Flow Tables consists of the following equipment;
• Bronze Flow Mould,
• Filling Hopper and Tamper.
The M2520A and M2520E manual models cement flow tables are included with a hand wheel. The M2525A and M2525E motor operated models cement flow tables are driven by a motor speed reducer coupling at the rate of one rev per second. The number of drops can preset on a counter and the machine stops automatically at the end of the cycle.
Cement Flow Tables consists of the following equipment;
• Bronze Flow Mould,
• Filling Hopper and Tamper.
Spécifications Techniques des TABLES À SECOUSSES POUR DES MORTIER
P.Code |
TMM-2520-A & TMM-2525-A |
TMM-2520-EN & TMM-2525-EN |
||||
|---|---|---|---|---|---|---|
Table Dia. |
254 mm |
300 mm |
||||
Cone Top/Base Dia. |
70 mm / 100 mm |
70 mm / 100 mm |
||||
Cone Height |
50 mm |
60 mm |
||||
Drop Height | 12.7 mm |
10 mm |
||||
| Cement Flow Tables - Order Features | ||||||
P.Code |
TMM-2520-A & TMM-2520-EN |
TMM-2525-A & TMM-2525-EN |
||||
Diameter |
270x270x280 mm |
460x350x360 mm |
||||
Weight(approx) |
14 kg |
38 kg |
||||
Vidéo et Fiche Technique des TABLES À SECOUSSES POUR DES MORTIER
