CONCRETE PIPE TESTING MACHINES

The Testmak Concrete Pipe Testing Machines are is used for compressive strength tests of concrete and steel pipes whose outside diameters are from 100 mm to 2600 mm. Concrete pipe test machines are manufacturer of capacity of between 400 kN to 1000 kN.
The Concrete pipe testing machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned.
Pipe Testing Machine frames have to be anchored to concrete base. All required parts to anchor the frame to the concrete base is supplied. The frames without carriying chassis is supplied with V shaped bottom bearers which can be anchored to concrete base.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V-shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360 degres at horizontal plane and allows it to move at vertical plane of a minimum value of ±8°. As an option 3- and 4-point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix the upper crosshead.

LCD Graphics Data Acquisition and Controls System
TCM200 is designed to control the machine and processing data from load cells or pressure transducers installed on the compression machine frame. Easy to read LCD graphics display and button data keypads make the unit quick and straight forward to operate. All interactions with the measuring system are via the front control panel by using simple menu-driven procedures. The TCM200 digital allows real time load us time graph. At the end of the test cycle, the results can be stored in the large memory or downloaded to a PC in TCM200 software format.
The TCM200 control console includes a multi-valve hydraulic pump, a safety valve, a pressure relief valve and an oil regulator, which ensures maximum safety and smooth linear loading. The machine can be supplied with standard automatic power pack, dual stage, controlled by TCM200

Technicial Features for TCM200 Touch Screen
• Color TFT touch display supports 16M colors and supports 800x480 pixel screen resolution
• 3 pcs universal analog input sockets (ADC)
• Each analog input with 18 bit precision (1/256000)
• 1 replacement analog input
• Total of 4 analog high-precision measuring capacities
• 2 analog output sockets (DAC)
• PULSE / DIR outputs (PULSE / DIR / ENA) to control the servo and stepper motor drives.
• Digital outputs for general purpose (can pull relays and control different electrical units)
• Digital inputs for general purpose (receives and evaluates input signals like limit contacts from the environment)
• Potentiometer input (reference signal input for calibration and remote control)
• USB communication signal output (communicates with computers)
• Connects to local networks and the Internet with Ethernet 10/100 network connection output (optional)
• Connects to portable devices via Bluetooth wireless connection (optional)
• 500 test results can be stored in internal memory
• Due to the SD (memory) card connection, a large number of test results can be stored in the device memory (40,000 test results).
• In addition, the results can be taken from the device memory and transferred to the computer as an Excel table. (Optional)
• Resistive touch screen allows easy operation of device functions by touching the screen
• Sensor modules are compatible with loadcell (load cell), pressure sensor (4-20 / 0-20 mA), potentiometric distance sensors, strain washers, thermocouples and all kinds of mV output sensors.
• Provides precise calibration with multi-point calibration (up to 10 points)
• Setting and calibration menus are password protected and prevent unauthorized use
• Allows testing with a computer, tablet, smartphone or on the touch screen panel.
• There are many test sample information screens and test methods in the device memory and tests can be performed easily
• Different menu languages can be selected via the device via language support (Turkish, English, French, Spanish and Russian)
• Speed control algorithm is closed loop PID control and all parameters can be adjusted on user side.
• The device can switch between one-touch load and deformation control modesCihaz farklı makinelere kolayca adapte edilebilir ve en uygun kontrol sağlanır
• The graphical field that visualizes the test results on the screen has the ability to change the scale automatically and automatically adjusts the optimal scale as the values change
• Firmware updates can be made via USB input. In addition, via the computer allows remote or internet update.

The test frame is delivered in disassembled form and mounted in place in accordance with the instructions. It is possible to add various functions at the request of the customer, as well as purchase only the control system, if the customer already has a test frame.